JVCC ATG1 ATG Tape Dispenser for 1/2 and 3/4 ATG Tape (Red)

The JVCC ATG1 ATG Tape Dispenser is a hand-held tape dispenser designed for use with ATG tape. The dispenser/applicator automatically winds up the liner on the ATG tape during use. It can accommodate both 1/2 inch and 3/4 inch rolls of ATG tape, and can also accept 1/4 inch ATG tape, although the rolls may slide around a bit on the spool since the spool is wider than the tape. However, some users may find this not to be an issue.

All the ATG tapes sold by the company will fit in the ATG1 dispenser. The dispenser's color may vary, depending on the color of the last lot received, and can be blue, red, teal, or orange.

To use the dispenser, start by placing the roll of tape on the spool in the middle of the gun, with the tape running down clockwise. Make sure the roll snaps down onto the spool so that if you pull on the tape, the roll does not spin freely on the spool unless you are also holding the trigger down.

The tape then runs on top of the roller closest to it and then under the roller in the front of the gun. During usage, the adhesive gets applied at the point of the front roller. When first loading the gun, remove any adhesive from the liner by hand at this point, so that only the liner then comes back over the roll, which is on the main spool in the middle of the gun, and then runs under the liner take-up spool. Secure the liner in one of the slits in that spool.

To apply the tape, hold the trigger down. This allows the spools to turn. To stop applying the tape, let go of the trigger and pull the dispenser away.

The JVCC ATG1 ATG Tape Dispenser is a versatile and user-friendly tool for applying ATG tape. Its ability to accommodate different tape widths and its automatic liner winding feature make it a convenient and efficient option for various applications.

product information: